Canor AI 1.20 (Class A) Solid-state Integrated Amplifier

Canor AI 1.20 Integrated Solid-state Amplifier PREMIUM LINE CANOR AI 1.20 is an integrated solid-state amplifier in pure class-A up to 50 W per channel with a relay attenuator with two standalone blocks for each channel. Highlights 01 Operates in a pure class A 02 264 000 uF of total filtering capacitance 03 Possibility to create a monoblock connection of 2 units Main Features Heat disposal We used a special copper plate for heat dissipation, which is installed on the heatsink and the power transistors are installed directly on the given copper plate. Dual-mono connection Dual-mono connection – each channel has its own power transformer. Power transformers are located in separate parts of the device. Amplifier design A shielded tunnel passes through the center of the AI 1.20 amplifier, in which filters with nanocrystalline coils are located. In addition, the input circuits are equipped with low-noise J-P transistors. Monoblock connection For even better performance and sound, it is possible to connect AI 1.20 as monoblocks using a data cable. One unit becomes the “master” unit and the other the “slave”. This is the so-called bridge connection of two amplifiers (a fully symmetrical connection) Product features An integrated solid-state amplifier in pure class-A up to 50 W per channel A relay attenuator with two standalone blocks for each channel PCB’s utilize our premium CMT™ technology (CANOR® PCB Milling Technology), it is the way we mill printed circuit boards CMT™ technology originated in a long-standing endeavour to improve the sonic performance of our products Power supply units with filtered out interfering signals from the mains supply Interference-rejection and as small as possible leakage field ensure custom-wound toroidal transformers 264 000 uF of filtering capacitance simulates a nearly stabilized supply voltage An option of synchronous control enables the use of two amplifiers in a monoblock mode without the need of using an extra preamplifier and that is a Master/Slave mode with an output power of 100W per channel Technical Specification Output power 2 x 50 W / 4 Ω 2 x 30 W / 8 Ω Gain -30 dB Inputs sensitivity 290 mV Frequency range (20 – 25 000) Hz ±0,5 dB / 5 W Input impedance 30 kΩ Inputs 5 x RCA, 2 x XLR (active only in monoblock connection) Total Harmonic Distortion <0,0009% / 1 kHz, 5 W Signal-to-noise ratio > 90 dB Filtration capacity 132 000uF / 35V (per channel) Damping factor at 4 Ω load at the output 250 (based on measured output impedance) Damping factor at 8 Ω load at the output 500 (based on measured output impedance) Power 230 V / 50 Hz / 375 VA Input power 305 W Dimensions (w x h x d) 435 x 170 x 485 mm Weight (net) 28 kg