Description ELAC Debut ConneX DCB41 Powered Speakers The ELAC Debut ConneX DCB41 Powered Speakers consist of one powered speaker and one passive speaker that are linked together. You can select either speaker for use as the left or right channel. The powered (primary) speaker houses the amplifiers for both speakers. There is no need to connect the speakers to an additional amplifier, stereo, or home theater receiver. The primary speaker includes all the physical source connections as well as Bluetooth antenna. The audio signals needed for the passive (secondary) speaker are transferred from the primary speaker via traditional speaker terminals and wire. Download Specifications >> View Owners Manual >> View ELAC Products >> Features Flexible Connection Options Connect to just about anything with a wide number of input options including: HDMI ARC, USB Audio (PC/Mac), Bluetooth (aptX), Digital/Optical, and Analog/Phono. Built-In, High-Quality Amplifiers The Debut Connex speakers feature two 50-Watt Class D amplifiers built directly into the speaker. These amplifiers have been acoustically matched to the ConneX drivers and are designed to run cool and efficient. Enhanced Bass Response ConneX includes Elac’s proprietary XBass Enhancer, providing a better overall bass extension and output (can be turned off). For better lower frequency extension and to minimize ventilation noise, the bass reflex port on the DCB41 is directed to the rear, in an “S” configuration. HDMI ARC Connect the HDMI ARC output from your compatible television and your TV’s remote control will control the volume of the Debut Connex speakers. USB Connection – High-Res 96Khz 24-bit Connect a USB cable from your Windows or Mac computer to the USB input on the DCB41, and you can enjoy high-resolution audio playback up to 96kHz 24-bit. The speakers’ volume can be controlled by the computer’s volume control. Bluetooth with aptX Playback your favorite music or podcast from your phone, tablet or computer using Bluetooth. To ensure the best possible quality the DCB41’s feature aptX technology delivering true CD quality audio from compatible phones. Built-In Phono Preamp The switchable built-in phono pre-amp allows you to connect just about any turntable directly to the speakers using standard RCA cables. A ground screw is also included. Turn off if you prefer not to use. Specifications SPEAKER TYPE: BASS REFLEX / POWERED AMPLIFIER POWER: 50 WATTS X 2 TWEETER: ¾” Soft Dome WOOFER: 4-1/2” Polypropylene FREQUENCY RESPONSE: 66Hz-25,000Hz (Anechoic) FREQUENCY RESPONSE: 50Hz—25,000Hz (In-Room) Total Harmonic Distortion (THD): (less than or equal) 0.20% Signal to Noise ratio (S/N): >= (greater than or equal) 90 dB MAXIMUM SYSTEM OUTPUT: 102dB @ 1m INPUT: HDMI (ARC) X 1 INPUT: LINE / PHONE (SWITCHABLE) X 1 INPUT: USB (96kHz 24-Bit) x1 INPUT: OPTICAL X 1 INPUT: BLUETOOTH (AptX) OUTPUTS: SUBWOOFER and SPEAKER REMOTE CONTROL: YES (INFRARED) FIRMWARE UPGRADEABLE: Yes (via USB) VOLTAGE: 120-240 Volts) WEIGHT: 7.6lbs (Powered), 6.3lbs (Passive)WEIGHT: 3.44 kg DIMENSIONS (DxWxH) : 203 × 140 × 244 mm COLOUR: Black Ash, Royal Blue, Walnut/ Orange
