FEATURES: Power Output: 400W RMS continuous into 4 Ohms Distortion THD: <0.007% at 1kHz at all powers up to 400W into 4 Ohms, <0.03% at 7kHz at all powers up to 400W Unbalanced and Balanced Voltage Inputs Mains Voltage: 100 – 120VAC or 190 – 250VAC Remote trigger switch between On & Standby Command Functions: Switch between On & Standby Ability to inhibit individual amplifier modules Amplifier module will indicate Over Temperature condition Halcro Reliability Assurance Service SPECIFICATIONS: Power Output 400W RMS continuous into 4 Ohms Frequency Response (-3db) 5 Hz – 45kHz Audio Inputs, selectable Unbalanced: RCA sockets Balanced: XLR sockets Outputs Internally bridged: Binding Posts Command Functions Switch between On & Standby Ability to inhibit individual amplifier modules Amplifier module will indicate Over Temperature condition Amplifier module will indicate Over Current condition Halcro Reliability Assurance Service Gain Unbalanced and balanced: 29x = 29dB Power Supply Universal switch mode Power factor corrected Fully protected Compliant in all countries Fault Indications LED turns red if Heatsink temperature exceeds 78°C LED flashes red if current limit exceeded Distortion THD:<0.007% at 1kHz at all powers up to 400W into 4ohms 0.03% at 7kHz at all powers up to 400W Noise: <30nV/sqrt(Hz) @ 1kHz referred to input Impedance Input Unbalanced: 10k Ohms Balanced: 10k Ohms Output impedance at 7kHz <80 milliohms Power Consumption Idle: <14W 350W with 4 Ohm load: 94% efficient) Mains Voltage 100-250 VAC Dimensions Weight: 49.8lb or 22.4 kg Height: 7 inches or 169mm Width: 17 inches or 438mm Depth: 16 inches or 410mm
