Halcro Logic MC50 – 5 Channel Power Amplifier
$53.14
$105.75
FEATURES: Power Output: 350W RMS continuous into 4 Ohms Distortion THD: <0.007% at 1kHz at all powers up to 350W into 4 Ohms, <0.03% at 7kHz at all powers up to 350W Unbalanced and Balanced Voltage Inputs Thermally controlled forced air cooling Mains Voltage: 100 – 120VAC or 190 – 250VAC Remote trigger switch between On & Standby Command Functions: Switch between On & Standby Ability to inhibit individual amplifier modules Amplifier module will indicate Over Temperature condition Halcro Reliability Assurance Service SPECIFICATIONS: Inputs, selectable Unbalanced: RCA sockets Balanced: XLR sockets Outputs Internally bridged: Binding Posts Command Functions Switch between On & Standby Ability to inhibit individual amplifier modules Amplifier module will indicate Over Temperature condition Amplifier module will indicate Over Current condition Halcro Reliability Assurance Service Gain Unbalanced and balanced: 29x = 29dB Power Supply Universal switch mode Power factor corrected Fully protected Compliant in all countries Fault Indications LED turns red if Heatsink temperature exceeds 78°C LED flashes red if current limit exceeded Distortion THD:<0.005% at 1kHz at all powers up to 350W into 4ohms 0.02% at 7kHz at all powers up to 350W (typically <0.01% at 350W) Noise: <30nV/sqrt(Hz) @ 1kHz referred to input Impedance Input Unbalanced: 10k Ohms Balanced: 10k Ohms Output impedance at 7kHz <80 milliohms Power Consumption Idle: <14W 350W with 4 Ohm load: <22W heat (>94% efficient) Mains Voltage 100-250 VAC Dimensions Weight: 25.0 kg Height: 7 inches or 169mm Width: 17 inches or 438mm Depth: 16 inches or 410mm
Power Amplifiers